Bently Nevada 200350-10-00-CN

Bently Nevada 200350-10-00-CN The accelerometer vibration sensor is widely used in the vibration detection and monitoring of industrial equipment. This sensor is designed to monitor the vibration conditions of mechanical equipment. The measurement range of this accelerometer is suitable for vibration detection in the low-frequency to high-frequency range, and it can monitor very small vibration changes.

Installation and Maintenance:

Installation Location: The Bently Nevada 200350-10-00-CN accelerometer is typically installed on the surface or bearing area of the equipment that requires vibration monitoring.

Connection Method: Data transmission between the sensor and the monitoring system is carried out through standard connection ports. Common connection methods include analog signals (such as 4-20mA, 10-50mV/g, etc.).

Ordering Information：

200350 Accelerometer

200350 – AA - BB - CC

A: Mounting Stud

00  ¼-28 SS w/ Brass tip, 0.5"

01  ¼-28 to M6 x 1.00 Stainless Steel

02  ¼-28 to M8 x 1.25 Stainless Steel

09  No mounting stud

10  1/4 -28 Adhesive Stud Mount

11  M6x1 Adhesive Stud Mount

12  M8x1.25 Adhesive Stud Mount

13  Magnetic Base Kit

B: Tolerance

00 100 mV/g ± 20% (10.2 mV/m/s^2 ±20%)

C: Approvals

00 No Approvals

01 CSA, ATEX, IECEx

Bently 330400-02-00 and 330400-02-CN(05) acceleration sensors work well in conjunction with the Bently 3500 mechanical protection system. They are typically connected to the Bentley 3500/42M, as well as the vibration monitor 1900/65A and the vibration monitor 2300/20-00-00.

Let's start to connect：info@htechplc.com