Product Introduction
VM600 CPUM rack controller and communications interface card pair with support for Modbus RTU/TCP or PROFINET, and a front-panel display.
The CPUx rack controller and communications interface card pairs (CPUM/ IOCN, CPUR/IOCR or CPUR2/IOCR2) are optional cards used to provide additional VM600 system functionality such as configuration management, "hot-swapping" with automatic reconfiguration, front-panel display, CPUx card pair redundancy, fieldbus data processing, frontpanel alarm reset (AR) button, MPS rack (CPUx) security, system event and measurement event logging, fieldbus communications (Modbus, PROFIBUS and/or PROFINET) and/or communications redundancy.
Technical Specifications
|
Model |
CPUM |
|
PN Number |
209-595-067-121 |
|
Description |
modular CPU card |
|
Origin |
Switzerland |
|
Dimension |
30*20*6cm |
|
Weight |
0.35kg |
Product Details
CPUM:
1.Connectors:
• NET: 8P8C (RJ45), female
Used for the primary Ethernet connection.
• RS232:DE-9 (9-pin D-sub), female
Used for the primary serial connection.
2.Status indicators (LEDs):
DIAG:Green LED used to indicate the status of the CPUM card: off, normal operation and status of VM600 MPS rack (CPUM) security
OK: Green LED used to indicate the status of the OK system check (sensor OK link check) for the currently selected measurement channe
A (Alert):Yellow LED used to indicate the status of the alarm monitoring (Alert or Alert−) for the currently selected measurement channel
D (Danger):Red LED used to indicate the status of the alarm monitoring (Danger or Danger−) for the currently selected measurement channel.
Front-panel display：
The CPUM front panel features an LCD display that uses display pages to show important information for the cards in a VM600 rack. For the CPUM itself, card run time, rack system time, rack (CPUM) security status, IP address/netmask and version information are displayed. While for MPC4 and AMC8 cards, measurements, card type, version and run time are displayed. For MPC4 and AMC8 cards, the level of the selected monitored output is displayed on a bargraph and numerically, with the Alert and Danger levels also indicated on the bar-graph. Measurement identification (slot and output number) is shown at the top of the display.
Welcome to inquiry!
Vibrating sensor,Acceleration sensor, Eddy-current transducer,Monitor system module,Gateway communication module.
Ms.Smiling Sales Manager┃CHINA
Atten：Smiling
Mobile/WhatsApp/Wechat:+86 18050035902
E-mail: info@htechplc.com
Website: https://www.joyoungintl.com/
Address: Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen,China.