Description
Technical Parameters
Product Introduction
The IS215UCVEM06A module has all the features of the UCVEH2 with the addition of supporting additional Ethernet ports and Profibus.
Some UCVEM_ _ modules support secondary 10BaseT/100BaseTX Ethernet ports for use on a separate IP logical subnet.
The secondary Ethernet port is configured through the toolbox. The controller validates its toolbox configuration against the existing hardware each time the rack is powered up. A separate subnet address allows the controller to uniquely identify an Ethernet port.
Technical Specifications
|
Manufacture |
General Electric(GE) |
|
Model |
IS215UCVEM06A |
| Part Number | IS215UCVEM06A |
|
Description |
Mark VI Controller UCVEM
|
|
Origin |
USA |
|
Dimension |
30*20*6cm |
|
Weight |
0.35kg |
RELATED PRODUCTS
UCVEM01 Controller Specifications
|
Item
|
Specification
|
|
Secondary Ethernet Interface
(Ethernet 2)
|
Twisted pair 10BaseT/100BaseTX, RJ-45 connector
EGD protocol
Ethernet Modbus protocol supported for communication between controller and third-party DCS
|
|
Power Requirements
|
+5 V dc, 6.2 A typical, 8.2 A maximum
+12 V dc, 180 mA typical, 250 mA maximum
-12 V dc, 180 mA typical, 250 mA maximum
|
UCVEM02 Controller Specifications
|
Item
|
Specification
|
|
Secondary Ethernet Interfaces
(Ethernet 2–4)
|
Twisted pair 10BaseT/100BaseTX, RJ-45 connector
EGD protocol
Ethernet Modbus protocol supported for communication between controller and third-party DCS
|
|
Power Requirements
|
+5 V dc, 8.3 A typical, 10.3 A maximum
+12 V dc, 180 mA typical, 250 mA maximum
-12 V dc, 180 mA typical, 250 mA maximum
|
UCVEM03 Controller Specifications
|
Item
|
Specification
|
|
PROFIBUS Interface (PROFIBUS 1-2)
|
PROFIBUS DP master class 1
|
|
Power Requirements
|
+5 V dc, 8.2 A typical, 10.2 A maximum
+12 V dc, 180 mA typical, 250 mA maximum
-12 V dc, 180 mA typical, 250 mA maximum
|
